Holt’sLand Clearing
and Preservation
Call(850) 509-9036Get my price rangePrice rangeCall

The machines we own.

We own every machine on this page. They leave for your land from our yard in Quincy.

Quincy, Florida and up to 100 miles around.

Chris Holt stands between his John Deere 335P track loader with a root grapple and his John Deere 60P excavator on a wet lawn in front of a wooden fence and oaks.

John Deere 335P

Compact track loader. A tracked carrier that swaps tools on its front.

This is the machine that carries the mulching head. It runs on two wide rubber tracks instead of four tires.

Specs and details: John Deere 335P

Its weight is spread along the ground, not set down on four patches. One carrier takes three of our tools: the MK76 mulching head, the root grapple and a bucket.

That is one machine hauled to your land, not three. The cab is closed, and a wire mesh guard covers the glass.

John Deere lists the 335P among the loaders that run the MK76 head. For that it calls for a high flow machine with a severe duty door.

Published figures

Engine power
118 hp gross, 114.7 hp net
Operating weight
12,300 lb with the standard 17.7 in. track
Rated operating capacity
4,025 lb with one counterweight (35 percent of tipping load)
Ground pressure
4.8 psi with the standard 17.7 in. track
Hydraulic flow to the tool
25 gallons a minute standard, 44 with the high flow option
Lift height to the hinge pin
11 ft 0 in.
Width without a bucket, standard tracks
6 ft 9 in.

Used for: Forestry Mulching, Land Clearing, Selective Clearing, Lot Clearing, Site Preparation, Grading, Hauling and Debris Removal

John Deere 335P compact track loader with a John Deere MK76 forestry mulching head parked on grass in afternoon sun, dirt packed in its rubber tracks.

John Deere MK76 mulching head

Forestry mulching head. A steel drum of cutting teeth that mounts on the front of the 335P.

This is the tool that turns a wall of brush into a floor of chips, with no burn pile and nothing hauled off. It shreds brush, vines and small trees where they stand and leaves the mulch on the ground.

Specs and details: John Deere MK76 mulching head

John Deere rates it for vegetation up to 8 inches thick and says it cuts going forward and backing up. That figure is the top of its range.

Bigger timber is not mulcher work, and I look at it in person before anyone promises a number. A mulching head works at ground level and leaves the roots in the ground.

Where a house pad or a driveway goes, the stumps still come out with the 60P excavator.

Two more things to know. The head is 7 feet 7 inches wide overall, so a gate or a gap between trees has to be wider than that. And the lettering on it reads KEEP BACK 300 FT, so plan on people, pets and vehicles staying well clear while it runs. More on the method is on the forestry mulching page.

Published figures

Cutting width
76 in.
Overall width
91 in. (7 ft 7 in.)
Weight
2,980 lb
Cutting tools
30 double edged knives on a depth control rotor
Rated for vegetation
Up to 8 in. thick
Hydraulic flow it needs
30 to 45 gallons a minute
Loader it needs
High flow machine with a severe duty door

Used for: Forestry Mulching, Selective Clearing, Lot Clearing, Land Clearing

Front of the John Deere MK76 mulching head: the MK76 lettering, the warning KEEP BACK 300 FT and the drum with its rows of teeth.

Blue Diamond root grapple

Root grapple. A steel rake with a hydraulic clamp, mounted on the 335P.

After the cutting comes the picking up. The grapple slides its tines under logs, limbs, roots and brush, clamps down and carries the load where it needs to go.

Specs and details: Blue Diamond root grapple

Its floor is open tines, not a solid bucket bottom, so loose dirt falls back out and stays on your land. The labels on ours read Blue Diamond and Severe Duty.

Used for: Land Clearing, Lot Clearing, Hauling and Debris Removal

Chris Holt stands beside his John Deere 335P track loader fitted with a root grapple, on wet grass in front of a split rail fence.

John Deere 60P

Compact excavator with a hydraulic thumb, a tooth bucket and a backfill blade.

The 60P does the digging and the picking. The thumb closes against the bucket like a hand.

Specs and details: John Deere 60P

It can pull one stump, lift one log or grab a piece of an old shed and set it where it belongs. That is machine work that would otherwise be chain and hand work.

John Deere builds the 60P with a reduced tail swing, so the back of the machine stays close to its tracks when it turns. That matters next to a house, a fence or a tree you are keeping.

The blade on the front pushes dirt back into a hole and levels it. John Deere lists its digging depth at 12 feet 4 inches with the standard arm.

Published figures

Engine power
53 hp net
Operating weight
13,620 lb with cab, rubber tracks and standard arm
Digging depth
12 ft 4 in. with the standard arm
Reach
20 ft 5 in. with the standard arm
Ground pressure
5.1 psi with cab, rubber tracks and standard arm
Standard backfill blade
6 ft 7 in. wide
Tail swing
Reduced tail swing, full circle rotation

Used for: Excavation, Demolition, Site Preparation, Grading, Land Clearing, Selective Clearing

Full side view of a John Deere 60P compact excavator with dozer blade, hydraulic thumb and tooth bucket on a sunlit lawn in front of a tree wall.

Massey Ferguson cab tractor with front loader

Farm tractor with a closed glass cab and a front loader. It pulls and powers the batwing cutter.

Open acres of grass, weeds and light brush are tractor work, not mulcher work. This red Massey Ferguson pulls the batwing cutter across a field, and its front loader lifts and carries with a bucket.

Specs and details: Massey Ferguson cab tractor with front loader

When the growth is light enough for it, bush hogging costs less per acre than mulching. The instant quote prices the two separately and shows a range for your acres.

Used for: Bush Hogging, Lot Clearing

Side view of a red Massey Ferguson cab tractor with a front loader, parked on a mowed lawn.

Batwing rotary cutter

Pull behind rotary mower with a center deck and folding wings. Also called a bush hog.

This is what takes a pasture that went to weeds back to a field you can walk and see across. It rides behind the Massey Ferguson, and the tractor turns its blades through a driveline.

Specs and details: Batwing rotary cutter

Chain guards hang along the edge of the deck to keep what the blades throw down low. Grass, weeds, briars and saplings up to about two inches thick are cutter work.

Thicker stems are a job for the mulching head. The cutter mows and does not pull roots, so what it cuts grows back and needs cutting again. More is on the bush hogging page.

Used for: Bush Hogging

The red deck of the batwing rotary cutter behind the tractor, with its gearboxes, chain guards and fresh clippings on top.

The details

Why it matters who owns the machine

A start day is a promise about a machine. If that machine is rented or borrowed, the promise also hangs on a rental counter or on somebody else's schedule. Ours hangs on our own yard. The dozer, the track loader, the mulching head, the grapple, the excavator, the tractor and the cutter are ours, and my own crew runs them.

The two John Deere machines are current models. John Deere sells both the 335P and the 60P today. In our photos of the excavator, the plastic is still on the seat and a shipping tag still hangs on the bucket.

No machine is breakdown proof. Rain can still move a day, because soaked ground can rut under any machine. But these machines are ours and they park in our own yard. Your start day does not wait on a rental counter.

Track loader
John Deere 335P
Tools for the 335P
John Deere MK76 mulching head, Blue Diamond root grapple, bucket
Excavator
John Deere 60PHydraulic thumb, tooth bucket, backfill blade
Tractor
Massey Ferguson cab tractorFront loader and bucket
Mower
Batwing rotary cutterPulled by the tractor
Dozer
John Deere 650PCrawler dozer with a front blade
Yard
Quincy, FloridaGadsden County

My dozer: the John Deere 650P

Some land needs more than a mulching head. Heavy timber, stumps and brush across open acres, ground that has to be pushed clear and left ready to work. That is dozer land clearing, and I do it with my own John Deere 650P.

The dozer pushes trees, stumps and brush into piles and opens the ground. The excavator digs out what the blade should not tear, and the grapple loads what has to go. Which machine does which part of your job, I settle on the walk before I give you a price.

How hard these machines press on your ground

It is a fair worry before any clearing job. Will the machines rut the yard and pack the soil around the trees you are keeping? Part of the answer is which machines show up.

What the extension services say

The University of Florida's extension service says the heaviest equipment is not always the best choice on a building site. Heavy equipment often packs and disturbs soil more than needed, when a lighter machine would do the work as well. Oregon State University's extension service adds a point about tracks. Many tracked machines are heavy but press lightly on the ground, because of their wide tracks.

John Deere classes the 335P and the 60P as compact machines, and both run on rubber tracks. Ground pressure is the weight of the machine divided by the area of track on the ground, in pounds per square inch (psi). Lower means a lighter footprint.

Weight and ground pressure, as John Deere publishes them
MachineOperating weightGround pressureSetup John Deere lists it for
John Deere 335P12,300 lb4.8 psiStandard 17.7 in. tracks
John Deere 60P13,620 lb5.1 psiCab, rubber tracks, standard arm
  • John Deere 335P

    Operating weight: 12,300 lb

    Ground pressure: 4.8 psi

    Setup John Deere lists it for: Standard 17.7 in. tracks

  • John Deere 60P

    Operating weight: 13,620 lb

    Ground pressure: 5.1 psi

    Cab, rubber tracks, standard arm

From the specification pages of the 335P brochure⁠ (opens in a new tab) and the 60P brochure⁠ (opens in a new tab). John Deere lists the 335P at 5.3 psi with its optional narrower track.

The 335P figure is not for the loader with a mulching head on the front. John Deere lists the MK76 head at 2,980 pounds by itself. So with the head on, the 335P presses harder than 4.8 psi.

Dry ground, the right size, one pass

Oregon State University's extension service gives three ways to keep machines from packing the soil. Run equipment when the soil is dry. Match the size of the machine to the size and kind of what is growing. Make one pass over the material.

What stays is decided before a machine starts. That part is on our process. The tree by tree work is on selective clearing.

How to read the figures on this page

Each photo shows one of our machines, parked. The numbers beside a machine are the maker's published figures for that model, each with its source. They are not measurements of our own machine.

Real jobs, with their photos, are on our work. What each job includes is on the services page.

Sources (8)

Where these facts come from

Rules change. Each link below was read on the date shown. Check with the office named before you act on it.

  1. 335 P Tier Compact Track Loader, product page (opens in a new tab). John Deere. Checked .

  2. 335 P Tier Compact Track Loader, product brochure MC335PAU (25-06), specifications (opens in a new tab). John Deere. Checked .

  3. MK76 Mulching Head, compact equipment attachment, product page (opens in a new tab). John Deere. Checked .

  4. Compact Construction Attachments, product brochure DKAATTACH (26-04), mulching heads, page 43 (opens in a new tab). John Deere. Checked .

  5. 60 P Tier Compact Excavator, product page (opens in a new tab). John Deere. Checked .

  6. 60 P Tier Compact Excavator, product brochure ME60PAU (23-07), specifications (opens in a new tab). John Deere. Checked .

  7. WEC278/UW323, Conservation Subdivision: Construction Phase: Protecting Trees and Conserved Natural Areas (opens in a new tab). University of Florida, IFAS Extension. Checked .

  8. EC 1575, Reducing hazardous fuels on woodland property: Mechanical treatments (opens in a new tab). Oregon State University Extension Service. Checked .

How a job runs

Draw it on the map. See what yours would run.

Two minutes on the map. You talk to nobody until you want to.

Rather talk it through? Call or text

CallTextPrice range