Holt’sLand Clearing
and Preservation
Call(850) 509-9036Get my price rangePrice rangeCall

Clearing, demolition and the pad, from one crew.

We do the clearing, the demolition, the dirt work and the hauling with our own machines and our own crew. I walk the scope with you before any price is final.

Quincy, Florida and up to 100 miles around.

Chris Holt leans against an equipment trailer with his arms crossed, his John Deere 335P track loader chained down on the deck behind him.

Who I work for

Builders: the lot has to be cleared and the pad ready for the slab crew

The concrete crew is on the calendar and the lot is still woods. We take the trees down, dig the stumps, pile or haul the debris and rough grade the pad on native soil. If your engineer calls for imported fill or tested compaction, say so at the walk. That changes the scope and the price.

Developers and land sellers: the parcel has to be showable

Nobody buys what they cannot walk. We underbrush the tract and leave the timber, so a buyer, a surveyor or an appraiser can see how the land lies. In Gadsden County, underbrushing of small growth is also the only clearing the county code⁠ (opens in a new tab) allows before development.

Site contractors: the ground has to be handed over clear

You do the utilities, the concrete or the building. You need the trees gone, the old structure gone and the debris off the site first. One crew does all three here, so you are not lining up three subs to get to bare dirt.

Farm and timber operations: pasture, fence lines and the understory

The batwing cutter keeps open ground open. The mulching head takes back pasture that went to brush and opens the hardwood brush under your pines. Walk the stand with me and flag what stays. Mulching cuts what is above the ground, so plan the follow up: sprouts come back⁠ (opens in a new tab) unless something keeps them down.

Thomasville, Georgia: a roadside lot grown shut with vine

A lot beside the street had grown shut with brush and vine. We mulched it with the John Deere 335P and the MK76 head and left big trees standing.

Before: dense brush and vine covered trees crowd a lot beside a street in Thomasville, Georgia, with the sun breaking through the canopy.

Before. From the street, along the curve of the road.

After: the Thomasville, Georgia lot cleared to a floor of fresh mulch and track marks, with the large trees left standing and houses visible beyond.

After. From a different spot than the before photos.

See the whole job: Thomasville, Georgia: a roadside lot grown shut with vine

What you can count on

  • A scope with edges

    A clearing price means little until the scope says where the work stops.

  • Licensed and insured: ask for the certificate

    We are licensed and insured. Ask for the certificate of insurance when you ask for the price.

  • A start date you can plan around

    The estimate visit is booked for a solid start time, Monday to Friday, and you pick it online.

  • One crew with its own equipment

    We own and run a John Deere 650P dozer, a John Deere 335P track loader with a John Deere MK76 mulching head and a Blue Diamond root grapple, a John Deere 60P excavator with a hydraulic thumb, and a Massey Ferguson cab tractor with a batwing cutter.

How a job goes, step by step

Questions builders and site managers ask

Can you send a certificate of insurance?

Ask for it with the price. We are licensed and insured. If your contract calls for set limits, a named certificate holder or additional insured wording, tell us before the walk. You get a straight answer on each.

Are you bonded? Can you meet our prequalification?

Send the list before the visit: bond, license class, insurance limits, safety paperwork. We answer each line yes or no, and every yes comes with the paper.

Who pulls the permits?

It depends on the permit. A development approval, an environmental resource permit and a stormwater notice usually sit with the owner and the engineer. A demolition permit comes from the local building department, and who applies for it is settled in the scope before the price is final. Tell us what is already approved and we work inside it.

Can you clear before we have the development approval?

In Gadsden County, only a little: before development, the county code⁠ (opens in a new tab) allows only underbrushing of vegetation under 4 inches in diameter, so the property can be surveyed. More than that takes a letter of permission from the Planning Department, for a site in the final stages of approval, and an approved plan. Underbrushing is forestry mulching work, so the 335P can open a tract for the surveyor and leave the timber alone. Other counties and cities draw their own line, so ask the planning office first.

Who handles erosion control?

Settle it in the scope: what your stormwater plan calls for, and who installs and keeps up the silt fence. On a Florida site under the construction stormwater permit⁠ (opens in a new tab), stabilization has to start within 7 calendar days after work stops on any part of the site, and the permit lists mulching among the measures. Forestry mulching leaves a layer of mulch on the ground as it goes, but whether that layer meets your plan is your engineer's call. Where stumps come out, the soil is bare, and your plan has to deal with that.

More questions
Can the debris be burned on site?

Sometimes, and never by default. In Florida every land clearing pile burn needs an authorization from the Florida Forest Service, and on a non residential site the pile must sit 1,000 feet⁠ (opens in a new tab) from any occupied building, or 300 feet with a permitted air curtain incinerator. Georgia requires a Georgia Forestry Commission permit and 1,000 feet⁠ (opens in a new tab) from any occupied structure unless the state approves less. Demolition debris is hauled, not burned, and in town those distances usually leave mulching in place or hauling.

How do you price a commercial job?

Area work is priced by the acre and by how thick the growth is, and structures by the piece. The instant quote shows a range for both. As a sample, it shows $4,400 to $7,150 today for a one acre lot of brush and small trees near Quincy, cleared with the stumps out and rough graded. Every range is an estimate: I confirm the price on site.

How soon can you start on a commercial site?

I will not promise a date from a web page. Book the estimate visit online for a set time, Monday to Friday, and I give you a start date there. Build in the locate days: Florida law⁠ (opens in a new tab) sets not less than 2 full business days before excavation or demolition, and Georgia 811⁠ (opens in a new tab) asks for at least 3 business days.

Can you work from our site plan?

Bring the plan, the survey and any tree save sheet to the walk, or draw the limits of clearing in the quote tool first. I walk those limits with you on the ground. What is inside them gets cleared and what is flagged stays.

Do you build pads to an engineered spec?

Tell us the spec at the walk. Our site preparation covers clearing, stump removal and a pad rough graded on native soil. Imported fill is priced on site. If your engineer calls for tested compaction, say so before the price, because that is a different scope.

What happens to demolition debris?

It is loaded and hauled off: we do not burn it. Florida⁠ (opens in a new tab) makes it illegal to burn treated lumber, plastics and household garbage, and Georgia⁠ (opens in a new tab) bans burning man made materials such as shingles and lumber. Our online range for a structure covers the tear down, the loading, the hauling and the dump fees. It leaves out the asbestos survey, the permit and the utility disconnects.

Is any job too big or too small?

My flyer says "No job too big or small." At the small end, our minimum is $2,000. At the big end, the instant quote stops giving a range past a set size and books a visit, because a big tract or big timber has to be seen. Ask me what I would bring to yours.

Do you work in Georgia?

Yes. We work up to 100 miles from Quincy, across North Florida and South Georgia, and Bainbridge, Albany and Valdosta are on our list. The rules change at the state line, and our permits guide covers both states. The towns are on the service areas page.

All questions and answers

The details

Permits and rules

Rules change by county and by what the land will be used for. Before we start, we look for protected trees, gopher tortoise burrows, wet areas and buried utilities. When a permit question comes up, I tell you which office to call.

The rules, each with its source: Land clearing permits and who to call.

Sample ranges for commercial work

These are ranges the instant quote shows today for six sets of answers. They are not a price list and not a bid. They show the size of the numbers before anyone drives out. Our job minimum is $2,000.

Sample ranges from the quote tool. Flat, dry ground, open access, close to Quincy.
The jobWhat the tool shows
One acre lot, brush and small trees, stumps out, rough graded$4,400 to $7,150
The same lot with a house pad up to 2,500 square feet on native soil$7,000 to $12,050
Five acres of heavy mixed growth, stumps out, debris piled on site$21,000 to $34,150, flagged for a site visit
Twenty acres of light understory, mulched around the pines$22,950 to $33,750
Single wide mobile home, torn down and hauled off$2,800 to $5,400
Wood frame house of 1,200 square feet, slab stays$5,850 to $10,950, flagged for a site visit

Estimates, not quotes. I confirm the price on site after I have walked the ground. Farther from Quincy the tool adds a line for equipment delivery. Demolition ranges leave out the asbestos survey, permits and utility disconnects.

Draw it on the map. See what yours would run.

Two minutes on the map. You talk to nobody until you want to.

Rather talk it through? Call or text

CallTextPrice range