What it costs, what stays, what the rules say.
40 questions landowners ask before a machine shows up, answered with our real numbers: a $2,000 minimum, free estimates, 100 miles out from Quincy. Where a rule applies, we name the office that decides it.
Price and estimates
How much does land clearing cost?
It depends on five things: the acres, the growth, the lay of the ground, the stumps and the miles from Quincy. The instant quote turns your own answers into a range in about two minutes: as a sample, it shows $4,250 to $6,250 today for two acres of brush and small trees, mulched, on flat, dry ground near Quincy. Every range is an estimate until I have walked the land. The cost guide shows what other contractors in this region publish.
What does mulching an acre cost?
On flat, dry ground the quote tool starts forestry mulching from these per acre figures today: light brush about $1,530 to $2,250, brush and small trees $2,125 to $3,125, heavy mixed growth $2,890 to $4,250. The per acre figure comes down on bigger jobs, and no job is under $2,000. I confirm the price after I walk it.
Is the estimate really free?
Yes, both parts. The online range costs nothing, and you see it before we ask for your name or number. The visit costs nothing either. I come out, walk the land with you and give you a price.
Is there a minimum job size?
Yes, $2,000 on every job. On a small lot that is often the price. The tool shows $2,000 to $2,500 today for a half acre house lot, mulched. If your job is a good deal smaller than that, we are likely the wrong call, and a lawn or tree service may fit it better.
What makes the price go up or down?
Thicker growth, sloped ground and wet ground push it up. So do stumps you want dug out, debris you want hauled off and a long haul from Quincy. Bigger jobs pay less per acre, and ground you mark to keep takes part of its acres off the price. The range screen of the instant quote lists what moved your own number.
Do you charge to bring the equipment out?
Not within about 30 road miles of Quincy. Farther out, the quote tool adds equipment delivery as its own line: about $10 for each further road mile for one machine, and one and a half times that when two machines have to come. Mulching is a one machine job, and the tool counts clearing with the stumps out and demolition as two machine jobs, so their delivery line is higher. Like every figure the tool shows, that line is an estimate, and I confirm it with the rest of the price.
Do you offer financing?
No, we do not offer financing. What you get is a price range online before anybody calls you, a free estimate on your land and a stated minimum of $2,000. You know the size of the number before you plan around it.
The instant quote tool
How does the instant quote work?
Open the instant quote and type the address or the nearest road. Tap the corners of the part you want cleared on the aerial photo, then ring the trees and spots that stay. Answer a few short questions: the kind of work, what is growing there, how the ground lies, anything to tear out and when you want to start. Then you see a price range for your own ground, in about two minutes.
Do I have to give my phone number to see the price?
No. The range comes first. We ask for a name and a mobile number only when you book the visit, or when you ask to have the range texted to you. If you close the page after the range, we have no number to call.
How does the tool measure my land?
From the outline you tap on the aerial photo: three taps make a shape, and the tool works out the acres inside it from where each corner sits on the map. You can outline up to 6 separate areas, and they add up. Ground you mark to keep inside an outline is measured the same way, and part of it comes off the price, not all of it, because working around what stays takes time. It is a measurement from a photo, not a survey.
What if the land has no address, or I do not know the acres?
Raw land often has no house number. Type the nearest road, or drop a pin on the map and move it onto the property. If you would rather not draw, estimate the acres with the slider, up to 40 acres. The range then has more room on the high end, because nothing was measured.
Why is the online price a range and not one number?
Because nobody has seen your land yet. The range is built from an aerial photo and your answers, and from above nobody can tell how thick the stems are, where the ground stays wet or how tight the way in is. The low end is never under our $2,000 minimum. A range is a range until I have walked the ground, and that visit is free.
Is there anything the tool cannot price?
Yes: digging is priced by the job, so for excavation the tool gives a starting figure of $2,000 and points you to the free visit. It also stops at a set size: 25 acres for mulching, 10 acres for clearing with the stumps out and 40 acres in all. Past about 100 miles from Quincy it shows a range for the work and leaves equipment delivery for me to quote. Mature trees still get a range, and so do houses up to 3,000 square feet and barns up to 1,500, each with a note that I confirm it on site.
What we do and how
What is the difference between forestry mulching and land clearing?
Forestry mulching grinds brush, vines and small trees into chips where they stand, with the John Deere 335P and its MK76 mulching head. The mulch stays on the ground, the roots stay in it, and nothing is burned or hauled. Land clearing takes the trees, stumps and roots out with my John Deere 650P dozer and the John Deere 60P excavator. A yard, a view or a pasture can be mulched, and a house pad or a driveway needs the stumps out, as the comparison guide explains.
What size tree is too big for the mulcher?
John Deere rates our MK76 head for vegetation up to 8 inches thick (opens in a new tab), and that is the top of its range. Brush, privet, vines and saplings are the everyday work. Grown trees past that are not mulched: they stay, or they come down as land clearing, and that gets sorted out tree by tree on the walk.
Does forestry mulching take out the stumps?
No. A mulching head works at ground level, and the roots stay in the soil. That is fine for a yard, a view, a trail or a pasture. Under a house pad, a driveway or a septic system, the stumps usually have to be dug out with the excavator, which is land clearing.
Does the brush come back after mulching?
Some of it will, because mulching cuts the top of the plant and leaves the roots alive. Mowing the sprouts, which is bush hogging, knocks them back but does not kill the roots. The forestry mulching page has the longer answer.
Do you run your own machines and your own crew?
Yes, the machines are ours and so is the crew. My John Deere 650P dozer does the dozer land clearing. The John Deere 335P track loader carries a John Deere MK76 mulching head and a Blue Diamond root grapple. The John Deere 60P excavator has a hydraulic thumb, and the Massey Ferguson cab tractor pulls a batwing cutter.
Are you licensed and insured?
Yes. We are licensed and insured, and I have 30 years of experience. We take residential and commercial work. If your job calls for a certificate of insurance or set limits, say so before the walk and ask for the paperwork with the price. Our guide on choosing a contractor lists what to ask anyone you hire.
How long will my job take?
It depends on the acres, the growth and how wet the ground is. One Virginia extension bulletin (opens in a new tab) says an acre of mulching can take anywhere from one to eight machine hours, which is how wide the answer runs before someone sees the land. Ask me for the number of days when I walk yours.
Protecting trees and ground
Can you clear the brush and leave my good trees?
Yes, that is the second half of our name. I walk the land with you first, the trees that stay get flagged, and then the machine clears what goes. There is no tree protection line on the price, and the selective clearing page has more.
How do I show you which trees stay?
Twice: first in the instant quote, where you ring single trees and draw around whole patches on the aerial photo, or say it in words. Then on the ground, where you point and the trees get flagged before any machine starts. The map is a head start, because tree crowns hide a lot from above. If you are not sure about a tree, say so on the walk.
How much room does a tree I am keeping get?
Enough to keep tracks and blades off its root zone. University of Florida extension (opens in a new tab) says protection should reach the drip line, the outer edge of the leafy canopy, and one and a half times that (opens in a new tab) for tall trees. Gadsden County's code (opens in a new tab) figures one foot of radius for every inch of trunk diameter on protected trees, so a 20 inch tree gets 20 feet. The room for each of your trees is set with you on the walk.
Can you promise a kept tree will live?
Nobody can promise that, and I will not. University of Florida extension says the roots of a tree in the woods often reach as far from the trunk as the tree is tall, and that even one pass of heavy equipment (opens in a new tab) over them can do significant damage. So the trees you flag get room, and their root zones are kept clear of tracks and blades. We can tell you exactly what we do to protect a tree, and that is all anyone can honestly offer.
Will the machines tear up my yard?
They leave marks, and wet ground marks the worst. Both of our John Deere machines run on rubber tracks, and Oregon State University extension (opens in a new tab) says to run equipment when the soil is dry and to cover the ground in one pass. Show me where the machine may drive and where it may not. Where we mulch, the chips stay on the ground as cover, which Virginia extension (opens in a new tab) says helps reduce erosion.
What about my septic field, my well and buried lines?
Tell me where they are. The quote tool asks what we have to work around: a well, a septic tank or drain field, buried power, water or gas lines, a pond or a creek, and I ask again on the walk. The utilities mark only the lines they own, not private lines (opens in a new tab): power to a shed or barn, an electric fence, water, septic and irrigation. Point them out, or hire a private locator if nobody knows where they run.
Permits, burning and rules
Do I need a permit to clear my land?
It depends on the county, the city and what the land will be used for. Gadsden County has a Tree Removal and Clearing Permit (opens in a new tab) outside city limits, and its form counts trees 20 inches thick and larger as protected. Leon County (opens in a new tab) and the City of Tallahassee (opens in a new tab) have their own tree and environmental permits, and the City of Valdosta (opens in a new tab) requires a land disturbance permit unless the work is exempt. We will not tell you that you need no permit, because that answer belongs to the office that issues it.
My lot is under an acre. Does that mean no permit?
No. In Florida, one acre is where the state's construction stormwater permit (opens in a new tab) starts, not where tree or clearing permits start. In Georgia, the state erosion law (opens in a new tab) exempts projects that disturb less than one acre, but not within 200 feet of the bank of state waters or inside a larger development, and a city or county can still regulate the job. Ask the planning office for your parcel before work starts.
Can the brush piles be burned on my land?
Only with the state's say: in Florida every land clearing pile burn needs an authorization from the Florida Forest Service (opens in a new tab), and a home site pile has to sit 300 feet from any occupied building that is not yours. In Georgia, burning machine piled debris takes a Georgia Forestry Commission permit (opens in a new tab), good only for the day it is issued. Mulching lights no fire, and the comparison guide lays out the choice.
What if there are gopher tortoise burrows on my land?
In Florida, gopher tortoises and their burrows are protected by state law. The wildlife commission says a relocation permit (opens in a new tab) is needed before a burrow is disturbed, and it counts any work within 25 feet of a burrow as a disturbance. It also says you may not need a permit if all the work stays at least 25 feet away. So a burrow changes the plan: the work stays 25 feet back, or the question goes to the commission before anything moves.
Can you clear a wet area or fill in a low spot?
Not on our say. Whether a wet area is a wetland is a call for the water management district, the state and the U.S. Army Corps of Engineers. In the Florida Panhandle the Northwest Florida Water Management District (opens in a new tab) regulates digging and filling in wetlands, isolated ones included, and Georgia's construction permit (opens in a new tab) keeps a 25 foot undisturbed buffer along state waters. If your outline touches a mapped wetland, the quote tool says so and I look at it on site.
Who calls 811 before you dig?
We request the locate. The law in Florida and Georgia puts that on whoever does the digging. Florida (opens in a new tab) requires at least 2 full business days of notice before excavation or demolition, and Georgia 811 (opens in a new tab) asks for at least 3 business days. So a job that breaks ground, like excavation, cannot start the morning after you say yes.
Scheduling and service area
How do I book the estimate, and do I get a real time?
Right after your range, you pick a day and a start time, Monday to Friday. It is a solid start time, not a window. Times are Eastern Time, the time in Quincy, and Marianna keeps Central Time (opens in a new tab), so a 9:00 visit there is 8:00 on a Central clock. If you would rather talk first, call or text (850) 509-9036.
Do I need to be there, and what should I have ready?
Be there for the walk: that is when you point out what stays, and nobody can do that for you. Know where your corners are, because we clear to the line you show us and we are not surveyors. Have a rough idea of what the land is for and where the septic, the well and any buried lines run. If you have none of that yet, book the walk anyway.
How soon can you start?
I will not promise a date from a web page. The quote tool asks when you want to start, so ask me for a start date at the visit. Build in the locate days on any job that breaks ground: 2 full business days in Florida and 3 business days in Georgia. Rain can move a date too.
How far do you travel?
We are based in Quincy and work up to 100 miles out across North Florida and South Georgia. If your land is inside the circle on the service areas map, it is in our area. Milledgeville and Sparta, Georgia are far past the circle, and we take jobs there by arrangement, so call or text (850) 509-9036 first.
Demolition
What can you tear down?
The quote tool prices sheds, mobile homes, houses, barns, old fence, concrete slabs and drives, and junk piles. The John Deere 60P excavator does the work, with a hydraulic thumb that closes against the bucket like a hand. A house or a barn up to a set size still gets a range online, and I confirm it on site before that number is firm. The demolition page goes through each kind of structure.
How much does it cost to tear down a mobile home?
The quote tool shows $2,800 to $5,400 today for a single wide and $3,500 to $6,750 for a double wide. That covers the tear down, the loading, the hauling and the dump fees. It does not cover an asbestos survey, the permit or the utility disconnects. These are estimates, and I confirm the price on site. The steps, in order, are in our mobile home demolition guide.
Do I need a permit to demolish a building?
In Florida, yes: state law (opens in a new tab) makes it unlawful to demolish any building without first getting a permit from the local enforcing agency, which is your county or city building department. Whether a shed or a mobile home counts is that office's call, so ask. In Georgia, ask the building department where the structure stands before you set a date. Ask the same office what has to be shut off first and whether an asbestos inspection applies.
What happens to the debris? Can it be burned on site?
It is loaded and hauled off, and the hauling and dump fees are inside our demolition prices. Burning it is illegal in both states. Florida (opens in a new tab) bans burning treated lumber, plastics and household garbage. Georgia (opens in a new tab) bans burning man made materials such as shingles and lumber.
Sources (26)
Where these facts come from
Rules change. Every link below was read between November 11 and November 12, 2026. Check with the office named before you act on it.
MK76 Mulching Head (opens in a new tab). John Deere. Checked .
Controlling Invasive Plants in North Florida Forests (SS-FOR-19/FR133) (opens in a new tab). University of Florida, IFAS Extension. Checked .
Options for Clearing Land to Establish Pasture (publication 465-341) (opens in a new tab). Virginia Cooperative Extension. Checked .
Reducing hazardous fuels on woodland property: Mechanical treatments (EC 1575) (opens in a new tab). Oregon State University Extension Service. Checked .
Protecting Trees During Construction (opens in a new tab). University of Florida, IFAS Gardening Solutions. Checked .
Conservation Subdivision: Construction Phase: Protecting Trees and Conserved Natural Areas (WEC278/UW323) (opens in a new tab). University of Florida, IFAS Extension. Checked .
Dispelling Misperceptions About Trees (SS-ORH-03/MG089) (opens in a new tab). University of Florida, IFAS Extension. Checked .
Land Development Code, Chapter 5, Subsection 5404: tree protection (version of December 19, 2023) (opens in a new tab). Gadsden County, Florida. Checked .
Tree Removal and Clearing Permit Application (form revised October 20, 2020) (opens in a new tab). Gadsden County, Florida, Planning Division. Checked .
Environmental Permits (opens in a new tab). Leon County, Florida. Checked .
Tree Permit (Growth Management Permits) (opens in a new tab). City of Tallahassee. Checked .
Land Development Regulations, Chapter 302, Article 5: Development Permits (Section 302-44) (opens in a new tab). City of Valdosta, Georgia. Checked .
NPDES Stormwater Program: Construction Activity (opens in a new tab). Florida Department of Environmental Protection. Checked .
Official Code of Georgia, section 12-7-17: exemptions (Erosion and Sedimentation Act) (opens in a new tab). State of Georgia, public copy on Fastcase linked from the Secretary of State rules site. Checked .
Know the Law: Land Clearing Debris Burns with ACI (opens in a new tab). Florida Department of Agriculture and Consumer Services, Florida Forest Service. Checked .
Burn Permits and Notifications (opens in a new tab). Georgia Forestry Commission. Checked .
Open Burning Rules for Georgia (opens in a new tab). Georgia Environmental Protection Division. Checked .
Gopher Tortoise Permits (opens in a new tab). Florida Fish and Wildlife Conservation Commission. Checked .
Environmental Resource Permits (opens in a new tab). Northwest Florida Water Management District. Checked .
General Permit GAR100001: stormwater discharges from stand alone construction activity (2023) (opens in a new tab). Georgia Environmental Protection Division. Checked .
Florida Statutes, section 556.105: Procedures (Underground Facility Damage Prevention and Safety Act) (opens in a new tab). The Florida Legislature, Online Sunshine. Checked .
The 811 Process (opens in a new tab). Georgia 811. Checked .
Private Facilities (opens in a new tab). Sunshine 811. Checked .
Florida Statutes, section 553.79: Permits; applications; issuance; inspections (opens in a new tab). The Florida Legislature, Online Sunshine. Checked .
49 CFR 71.5: Boundary line between eastern and central zones (opens in a new tab). Code of Federal Regulations, as published by the Legal Information Institute, Cornell Law School. Checked .